mb air systems
mb air systems

The PNEUDRI range of heatless and heat regenerative dryers has proven to be the ideal solution for many thousands of compressed air users worldwide and in a wide variety of industries.

PNEUDRI totally cleans and dries compressed air down to -40°C pressure dewpoint (pdp) as standard.

For critical applications, PNEUDRI can be specified to provide a pressure dewpoint of -70°C pdp. It is worth noting that a pressure dewpoint of -26°C or better will not only prevent corrosion, but will also inhibit the growth of micro-organisms within the compressed air system.

Multi-banking
Unlike the loose filled adsorbent bed of traditional twin tower dryer designs, PNEUDRI with it’s snowstorm filled adsorbent beds provides an equal resistance to air flow. Therefore, when the system flow of an installation exceeds the capacity of the largest single dryer model, PNEUDRI can be multi- banked to meet the demand. Should demand increase in the future, there is no need to replace the dryer with a larger unit, additional capacitycan be covered by simply adding an extra bank or banks, a feature only possible with PNEUDRI.

PNEUDRI MIDIplus

PNEUDRI MIDIplus

Compressed air contamination problems can be simply avoided by installing a Parker domnick hunter PNEUDRI MIDIplus High Efficiency Desiccant Air Dryer package fitted with OIL-X EVOLUTION compressed air filtration. The desiccant air dryer systems are suitable for use with any compressor type and are suited to point of use dryer applications.

• Heatless Regeneration (PSA) Pressure Swing Adsorption
• 49 – 299 m3/hr
( 24 – 176 cfm )

PNEUDRI MX Range

PNEUDRI MX Range

Using patented Parker domnick hunter technology, PNEUDRI MX Heatless Desiccant Air Dryers for flows of 240 scfm and larger provide the ultimate in clean and dry compressed air.
ATEX and Zone II Models Available

• Heatless Regeneration (PSA) Pressure Swing Adsorption
• Single Bank
408 – 2040 m3/hr(240 – 1200 cfm )
• Multi Bank >2041 m3/hr ( >1201cfm

PNEUDRI MiDAS

PNEUDRI MiDAS

PNEUDRI MiDAS desiccant point of use dryers will benefit users who have a specific need for Clean Dry Air (CDA) directly after a compressor, or for a particular application where the air is critical to the operating process or end product.

• Heatless Regeneration (PSA) Pressure Swing Adsorption
• 5.1 – 34 m3/hr
( 3 – 20 cfm )

PNEUDRI MXLE ADVANTAGE

PNEUDRI MXLE ADVANTAGE

Low energy heatless dryers

The PNEUDRI MXLE ADVANTAGE has been specifically
designed to provide all of the benefits of a traditional PNEUDRI MX heatless adsorption dryer with the additional benefits of increased compressed air available for plant use, lower energy costs and lower environmental impact.

• Heatless Regeneration (PSA) Pressure Swing Adsorption
• 408 to 2040 m3/hr
( 240 – 1200 cfm )

Ingersoll Rand Modular Dryers

Combination / Box Sets Filter Regulator Lubricator
Ingersoll Rand’s innovative modular air dryers make it easier and more affordable than ever to deliver high-quality compressed air for instrumentation, process equipment, or production lines – virtually wherever it is needed:
5 – 299 m3/hr
( 3 – 176 cfm )

 

Downloads
Compressed Air Dryers: Modular Desiccant Download Brochure
Compressed Air Dryers: Modular Desiccant Download Brochure
Compressed Air Dryers: Modular Desiccant Download Brochure